S2KCA Forum - S2000 Fact Sheet

Finally, a complete specification sheet of the S2000! But it's still US-spec

S2KCA Forum - S2000 Fact Sheet

The one for the Gulf versions read as follows:



ENGINE
2000-2003 F20C
2.0L - 16v VTEC(highest output per liter of any normally aspirated motor sold)
11:1 Compression ratio
87mm bore x 84mm stroke
9000 RPM REDLINE
240HP @ 8300 RPM
153 FT-LBS @ 7500RPM
Weight 326 lbs
Rated as a Low Emission Vehicle by the EPA
Lightweight forged aluminum pistons (know as "slipper" pistons)
Cast-aluminum oil pan
Block Material - Aluminum Alloy w/Fiber-Reinforced (FRM) Cylinder Walls
Cylinder-Head Material - Aluminum Alloy
Lightweight, MIM (Metal-Injection Molded), Sintered-Steel Rocker Arms, Low-Fricition Roller-Bearing Cam
Followers, Compact, 2-Stage Cam-Drive with Silent Chain, Scissors Gears and Fully Automatic Tensioner
Fuel Induction System - Multi-Point Programmed Fuel Injection (PGM-FI)
Emission Control - Low Back Pressure, Metal-Honeycomb Catalytic Converter
Electric-Motor-Drive, Multi-Port Secondary Air-Asist Injection System

POWERTRAIN
6-Speed Transmissions Gear Ratios:
Primary Gear Reduction - 1.208
1st gear - 3.133
2nd gear - 2.045 --- Est speed @ 8000rpm ~ 52mph
3rd gear - 1.481
4th gear - 1.161
5th gear - 0.942
6th gear - 0.763
Reverse - 2.800
Final Drive Ratio - 4.100


CHASSIS
High X-Bone Monocoque Frame
Weight - 2835lbs with a 49/51 weight balance
A reinforced windshield A-pillar to act as a forward roll bar
Dual roll bars behind the seats
Honda did it's own in house roll over testing of the S2000, since the US goverment did not test roll over.


STABILIZER BAR
Front - 26.5 mm.
Rear - 25.4 mm


SUSPENSION
Front Suspension - Independent In-Wheel Double Wishbone & Coil Springs & Shock Absorbers Gas- Pressurized Mono-Tube
Rear Suspension - Independent In-Wheel Double Wishbone & Coil Springs &
Shock Absorbers Gas- Pressurized Mono-Tube w/ External Resevoir


STEERING
Electric Power Rack-and-Pinion
Steering Wheel Turns (lock-to-lock) - 2.6
Steering Ratio - 14.9
Turning Diameter (ft., at wheel center) - 35.4


WHEELS & TIRES
Front - 17" x 7.0" Aluminum Alloy - Bridgestone RE 050 P215/ 45 R17
Rear - 17" x 8.5" Aluminum Alloy - Bridgestone RE 050 P245/ 40 R17


BRAKES
Power-Assisted 4-Wheel Disc Brakes w/ ABS
Ventilated Front Disc Brakes (diameter) 11.8 in.
Solid Rear Disc Brakes (diameter) 11.1 in.


CAPACITIES
Oil, Engine & Filter (liters/qt.) - 5.6 / 5.1
Transmission (qt./liter) - 1.56 / 1.48
Cooling System (liters/qt.) - 7.6 / 7.1
Fuel Tank (gal. / liter) - 13.2 / 50


FUEL
Recommended Fuel - Premium Unleaded
EPA Mileage, City / Highway (mpg) - TBA
Fuel Tank (gal. / liter) - 13.2 / 50


EXTERIOR DIMENSIONS
Wheelbase (in.) - 94.5
Track, Front (in.) - 57.9
Track, Rear (in.) - 59.4
Length (in.) - 162.2
Width (in.) - 68.9
Height (in.) - 50.0
Minimum Ground Clearance
Non-Load (in.) - 5.1
Full-Load (in.) - 4.2


INTERIOR & TRUNK DIMENSIONS
Headroom (in.) - 34.6
Legroom (in.) - 44.3
Hiproom (in.) - 49.8
Shoulder Room (in.) - 50.7
EPA Passenger Volume (cu. ft.) - 45.1
EPA Cargo Volume (cu. ft.) - 5.00